O.S. 10LA 11411 Non-ring 10H Carburetor 871 Muffler
11411 O.S. Engines 10LA Non-ring 10H Carburetor 871 Muffler OSMG0011
This is the Natural Finish OS Max .10 LA Aircraft Engine. Great for compact size and trainer model aircraft.
Features
-
O.S. Engines 11411 10LA Non-ring 10H Carburetor 871 Muffler OSMG0011
-
Remote needle valve mounted on the backplate
-
Set screw in the end of the needle valve is used to mount an extension wire for in-cowl applications (wire not included).
-
Extra-long bushing supported crankshaft
-
Vertical fuel inlet on the needle valve at rear of engine
-
Thicker webbing on high-stress areas
-
Two year limited warranty
Specifications
-
Length end of crankshaft to back of the needle: 3.2" (82mm)
-
Length back of needle to front of drive washer: 2.4" (62mm)
-
Length mounting holes on-center front to rear: 0.43" (11mm)
-
Length center of Crankcase to end of Drive Washer: 1.5" (38.7mm)
-
Width mounting holes on-center side to side: 1.2" (31.4mm)
-
Crankcase Width: 1.4" (38.6mm) with mounting flanges
-
Crankshaft Thread Size: 5.0mm x 0.8mm
-
Height bottom of Crankcase to top of Cylinder Head: 2.2" (56mm)
-
Height bottom of mounting tab to top or Cylinder Head: 1.7" (44.3mm)
-
Displacement: 0.107 cu in (1.76cc)
-
Bore: 0.529 in (13.4mm)
-
Stroke: 0.488 in (12.4mm)
-
RPM Range: 2500-18,000 RPM
-
Output: 0.27 ps @ 17,000 RPM
-
Weight: 3.95oz (112g)
Contents
-
.10 O.S. Max LA Engine w/Remote Needle Valve and #10H Carburetor, A3 glow plug, #871 muffler with pressure fitting, two 2.6 x 23mm phillips head muffler mounting screws, 2.5" (63mm) section of fuel tubing and instruction manual
Requirements
-
Fuel: 5% to 15% nitromethane, 18% lubricant
-
Propeller: 7x4 for break in, 7x3-5, 8x4 for trainer and sport models
-
Misc. Items: Starting and maintenance equipment.
- Item #: OSMG0011
