HPI 103850 Baja 5T RTR w/2.4 Radio

This is the 1/5 scale, gasoline powered, 2.4GHz radio controlled, HPI Baja 5T Ready to Run Off-Road Truck. Uses many existing Baja 5B spare parts and option parts.

 Features

• HPI 103850 Baja 5T RTR w/2.4 Radio

• Chassis: Black anodized 4mm 6061-T6 aircraft grade extruded and CNC milled, chassis guards, extended upper roll cage for spark plug protection

• Drive: Rear wheel gear drive

• Engine: 2 cycle 1.6 cu in (26cc) gasoline with pull starter, dual element foam air filter, primer, choke, kill switch and built in cooling fan

• Exhaust: Steel muffler routed to rear of vehicle with aluminum pipe

• Radio: 2.4GHz Spread Spectrum DSSS with failsafe function that prevents low voltage runaways, steering dual rate, servo reversing switches and flashing LED low battery warning

• Servos: Water resistant SFL-10MG2 metal gear ball bearing equipped steering servo

• Receiver Battery: 3000mAh, five sub C-cell 6V NiMH rechargeable pack with standard connector

• Clutch: High performance 8,000 RPM

• Ball Bearings: Full set included, 23 total

• Shocks: VVC/HD oil-filled coil over design with large diameter shafts 16 hole rear pistons with sealing ring for consistent damping

• Shock Towers: Composite with modified rear brace for increased suspension travel

• Transmission: 19 tooth transmission top gear for quick acceleration and top speed, all gears are metal

• Rear Dogbones: Metal construction with rubber boots

• Gearbox: Sealed

• Differentials: Viscous Torque Control can be tuned using different weight diff oils, hardened metal planetary gears

• Brakes: Ventilated steel/aluminum hybrid rotor and semi-metallic pads

• Tires: Desert Buster heavy duty rubber compound and thicker carcass for extra durability, heavy duty rear inner foam inserts

• Wheels: Outlaw eight hole design, nylon construction heavy duty bead locks

• Body: 0.08" (2mm) thick polycarbonate truck body pre-painted black or white with new body mounting system featuring eight nylon mounting points

• Rear Wing: Molded nylon with integrated rear body brace

• Roll Cage: Baja style high impact nylon protects engine and body from crash damage

• Suspension: Fully adjustable with turnbuckles, double wishbone, front and rear sway bars

• Caster: Adjustable, front, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

• Camber: Adjustable, front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

• Warranty: 2-year limited through manufacturer beginning at date of purchase

 Specifications

• Vehicle-

• Length: 35.4" (900mm)

• Front Width: 17.3" (440mm)

• Rear Width: 18.1" (460mm)

• Height: 12.6" (320mm)

• Weight: 27.8lbs (12.6kg)

• Wheelbase: 22.4" (570mm)

• Ground Clearance: 3" (76mm)

• Front Tread: 14.5" (370mm)

• Rear Tread: 15.4" (391mm) distance between center of tires side-to- side

• Front Track: 17" (432mm)

• Rear Track: 17.8" (453mm) distance between outer edges of tires side- to-side

• Tires- Front: Outer Diameter: 7.5" (190mm), Width 2.4" (60mm),

• Inner Diameter: 5.1" (130mm)

• Rear: Outer Diameter: 7.5" (190mm), Width 2.7" (70mm),

• Inner Diameter: 5.1" (130mm)

• Body-

• Length: 35.5" (902mm)

• Width: 17.5" (445mm)

• Height: 8.25" (210mm)

• Thickness: 0.08" (2mm)

 Package Contents

• HPI Baja 5T RTR truck with 1.6 cu in (26cc) gasoline engine 2.4GHz radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual

 Requirements

• Unleaded Gasoline: 87-93 octane, mix gasoline and oil at 25:1 ratio

• Transmitter Batteries: 8 AA

• Screwdriver: Flat blade, 3/16" (4-5mm) wide

 Comments

• The 2.4GHz HPI Baja 5B 2.0 is available with the following body colors; Black, HPID60LL White, HPID60WW

• For Replacement Ball Bearings use:

• Qty.     Size             Location                       Qty.     Bearing Set

• 4         12x24mm     Fr Wheel Hubs             2             HPIC0089

• 4         12x24mm     R Wheel Hubs              2             HPIC0089

• 2         10x15mm     Steering Shafts             1             DTXC1595

• 2         17x30mm     Idler Gear                    1             HPIC0092

• 2         12x24mm     Drive Gear                   1             HPIC0089

• 1         12x24mm     Spur Gear Mount           1             HPIC0089

• 2         10x15mm     Diff                             1              DTXC1595